KAIST :: 응용열전달 연구실




	International Conference 2023 Jung, C. and Kim, S.J., "Passive Check Valves for Flat-Plate Pulsating Heat Pipes", International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2023), Oct 24 - 26, 2023, San Diego, USA Lee, J. and Kim, S.J., "Effects of the fin spacing of a pin-fin array on flow boiling performance", International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2023), Oct 24 - 26, 2023, San Diego, USA Lee, Y.J. and Kim, S.J., "Effect of grooved channel on the thermal performance of a pulsating heat pipe", 17th International Heat Transfer Conference (IHTC 2023), August 14-18, 2023, Cape Town, South Africa. Lee, Y.J. and Kim, S.J., "Experimental Investigation on Thermal-Hydraulic Performance of 3-D Manifold Microchannel (MMC) for High Heat Flux Electronics", 17th International Heat Transfer Conference (IHTC 2023), August 14-18, 2023, Cape Town, South Africa. 2022 Lee, Y.J. and Kim, S.J., "3-D Manifold Microchannel (MMC) with Pin-Fins and Plate-Fins for Silicon-Based Embedded Cooling of Ultra-High Heat Flux Electronics", International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2022), Oct 25 - 27, 2022, Garden Grove, California, USA Lee, Y.J. and Kim, S.J., "Effects of the Micro-Post Array on the Operating Limit of a Micro Pulsating Heat Pipe", International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2022), Oct 25 - 27, 2022, Garden Grove, California, USA Jung, C. and Kim, S.J., "Effects of oscillation characteristics on heat transfer mechanisms in pulsating heat pipes", The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM 2022), May 30 - June 3, 2022, San Diego, USA Lee, J., Kim, B., and Kim, S.J., "Development of a Numerical Simulation Model for Predicting the Temperature of a Flip-Chip Package during The Laser-assisted Bonding Process", The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM 2022), May 30 - June 3, 2022, San Diego, USA 2021 Lee, Y.J., Lee, Y.J., and Kim, S.J., "Loop heat pipe heat exchanger (LHP-HX) for recovering liquefied natural gas (LNG) cold energy", The 2nd Asian Conference on Thermal Sciences (ACTS 2021), Oct 3 - 7, 2021 (Virtual) Lee, Y.J. and Kim, S.J., "Experimental investigation on the operating limit of a micro pulsating heat pipe with the micro-post array", The 2nd Asian Conference on Thermal Sciences (ACTS 2021), Oct 3 - 7, 2021 (Virtual) Jung, C and Kim, S.J., "Study on the effects of flow characteristics on heat transfer mechanisms of pulsating heat pipes", Joint 20th International Heat Pipe Conference(IHPC 2021) and 14th International Heat Pipe Symposium(IHPS 2021), September 7 - September 10, 2021 (Virtual) Lee, Y.J and Kim, S.J., "Compact modeling of the pin-fin heat sink with variable fin density cooled by natural convection", The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM 2021), June 1 - June 4, 2021 (Virtual) 2019 Lee, G. and Kim, S.J., "Topology Optimization of Heat Sinks under fully developed condition.", The 2nd Pacific Rim Thermal Engineering Conference (PRTEC2019), Dec 13 - Dec 17, 2019, Hawaii, USA Noh, H.Y. and Kim, S.J., "Numerical simulation of flat-plate pulsating heat pipes", The 2nd Pacific Rim Thermal Engineering Conference (PRTEC2019), Dec 13 - Dec 17, 2019, Hawaii, USA Lim, J. and Kim, S.J., "Analysis of channel layout of pulsating heat pipe using topology optimization", International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2019), Oct 7 - Oct 9, 2019, Anaheim, USA Kim, J. and Kim, S.J., "Experimental investigation on the effect of the operating temperature on the flow characteristics and the thermal performance of a micro pulsating heat pipe", International Symposium on Oscillating/Pulsating Heat Pipes (ISOPHP 2019), Sep 25-28, 2019, Daejeon, KAIST, Korea Noh, H.Y. and Kim, S.J., "Numerical investigations of the heat transfer characteristics of pulsating heat pipes", International Symposium on Oscillating/Pulsating Heat Pipes (ISOPHP 2019), Sep 25-28, 2019, Daejeon, KAIST, Korea Jun, S. and Kim, S.J., "Figure of merit for normal operation of pulsating heat pipes in a horizontal orientation", International Symposium on Oscillating/Pulsating Heat Pipes (ISOPHP 2019), Sep 25-28, 2019, Daejeon, KAIST, Korea Jo, J. and Kim, S.J., "Experimental investigation of Heat Transfer Mechanisms of a Pulsating Heat Pipe", International Symposium on Oscillating/Pulsating Heat Pipes (ISOPHP 2019), Sep 25-28, 2019, Daejeon, KAIST, Korea Yoon, A. and Kim, S.J., "Experimental and theoretical studies on oscillating frequencies of liquid slugs in micro pulsating heat pipes", International Symposium on Oscillating/Pulsating Heat Pipes (ISOPHP 2019), Sep 25-28, 2019, Daejeon, KAIST, Korea Kim, J and Kim, S. J., "The effect of the operating temperature on the thermal performance of a micro pulsating heat pipe", 6th Micro/Nanoscale Heat and Mass Transfer International Conference (MNHMT 2019), July 8-10, 2019, Dalian, China. Aubin. P., Cataldo F., Marcinichen J.B., Amalfi R.L., Kim S.J., and Thome J.R. "Numerical Simulations of Pulsating Heat Pipes, Part 2: Comparison to Experimental Data", 18th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), May 28 - May 31, 2019, Las Vegas, USA Jung, C. and Kim, S.J., "Fabrication and experimental study of a polymer-based pulsating heat pipe with metallic packaging", 4th Thermal and Fluids Engineering Conference (TFEC 2019), April 14-17, 2019, Las Vegas, Nevada, USA Kim, W. and Kim, S.J., "Comparison of thermal performance between CEPHP and CLPHP", 4th Thermal and Fluids Engineering Conference (TFEC 2019), April 14-17, 2019, Las Vegas, Nevada, USA 2018 Lee, G. and Kim, S.J., "Topology optimization of 2D extruded heat sinks in forced convection", 29th International Symposium on Transport Phenomena (ISTP 2018), October 30- November 2, 2018, Honolulu, Hawaii, USA Yu, D. and Kim, S.J., "Analytic Solutions of the Friction Factor and the Nusselt Number for the Low-Reynolds Number Flow in the Spiral-finned Tube", 29th International Symposium on Transport Phenomena (ISTP 2018), October 30- November 2, 2018, Honolulu, Hawaii, USA Noh, H.Y. and Kim, S.J., "Numerical investigation on flow and thermal characteristics of pulsating heat pipes", 16th International Heat Transfer Conference (IHTC 2018), August 10- August 15, 2018, Beijing, China Lim, J. and Kim, S.J., "Effect of channel layout on the thermal performance of pulsating heat pipe under local heating condition", 16th International Heat Transfer Conference (IHTC 2018), August 10- August 15, 2018, Beijing, China Yoon, A. and Kim, S.J., "Theoretical and experimental investigations on flow and thermal characteristics of micro pulsating heat pipes", 16th International Heat Transfer Conference (IHTC 2018), August 10- August 15, 2018, Beijing, China Jun, S. and Kim, S.J., "Experimental Study on Flow and Thermal Characteristics of Pulsating Heat Pipes", Joint 19th International Heat Pipe Conference (IHPC 2018) and 13th International Heat Pipe Symposium (IHPS 2018), June 10- June 14, 2018, Pisa, Italy Kim, J. and Kim, S.J., "Study on working fluid selection for a micro pulsating heat pipe", Joint 19th International Heat Pipe Conference (IHPC 2018) and 13th International Heat Pipe Symposium (IHPS 2018), June 10- June 14, 2018, Pisa, Italy Kim, M. and Kim, S.J., "Study on the heat transfer mechanism in nucleate boiling of water by measuring local heat flux and temperature", The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, May 29 - June 1, 2018, San Diego, USA Kim, W. and Kim, S.J., "Experimental investigation on the thermal performance of double-condenser pulsating heat pipes", The 10th International Conference on Boiling & Condensation Heat Transfer (ICBCHT 2018), March 12 - March 15, 2018, Nagassaki, Japan Joo, Y. and Kim, S.J., "Thermal optimization of heat sinks using the topology optimization method considering shape-dependent convection effects", 12th Japan-Korea-China Student Symposium, March 15 - March 17, 2018, Tokyo, Japan 2017 Kim, M. and Kim, S.J., "Study on the heat transfer mechanism in saturated pool boiling of water", Thermal and Fluids Engineering Conference (TFEC 2017), Oct 27 - Oct 30, 2017, Okinawa, Japan Yu, D. and Kim, S.J., "Pressure drop and heat transfer characteristics of wavy plate fins for the low-reynolds number flow", International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2017), Aug 30 - Sept 1, 2017, San Francisco, USA Kim, W. and Kim, S.J., "Experimental investigation of artificial cavities on the thermal performance of a pulsating heat pipe", International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems (InterPACK 2017), Aug 30 - Sept 1, 2017, San Francisco, USA Jo, J. and Kim, S.J., "Effect of Velocity Non-uniformity on Heat Transfer in Oscillating Flow", The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM 2017), May 30 - Jue 2, 2017, Oralndo, USA Lim, J. and Kim, S.J., "A Polymer-Based Pulsating Heat Pipe: Fabrication and Investigation of Thermal Performance", The Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM 2017), May 30 - Jue 2, 2017, Oralndo, USA Kwon, H., Joo, Y. and Kim, S.J., "Optimal Design of Natural Convection Cooled, Radial Plate-fin Heat Sinks", The 1st Asian Conference on Thermal Sciences 2017 (ACTS 2017), Jeju, Korea Yu, D. and Kim, S.J., "Analysis for Fluid Flow and Heat Transfer between Two Wavy Fins", The 1st Asian Conference on Thermal Sciences 2017 (ACTS 2017), Jeju, Korea Kim, W. and Kim, S.J., 2017, "Experimental investigation on the thermal performance of a pulsating heat pipe with artificial cavities", The 1st Asian Conference on Thermal Sciences 2017 (ACTS 2017), Jeju, Korea Jo, J. and Kim, S.J., 2017, "Heat Transfer by Oscillating Flows in a Parallel Plate Channel with a Sinusoidal Wall Temperature Distribution", The 1st Asian Conference on Thermal Sciences 2017 (ACTS 2017), Jeju, Korea Lim, J. and Kim, S.J., 2017, "Fabrication and thermal performance evaluation of a polymer-based pulsating heat pipe", The 1st Asian Conference on Thermal Sciences 2017 (ACTS 2017), Jeju, Korea 2016 Kim, J. and Kim, S.J., 2016, "Experimental study on the effect of the cooling capacity of condenser section on the thermal performance of pulsating heat pipes", IMECE16, Nov. 11-17, 2016, Arizona, USA. Noh, H.Y. and Kim, S.J., 2016, "Thermal characteristics of pulsating heat pipes operating in a circulation mode", IMECE16, Nov. 11-17, 2016, Arizona, USA. Jun, S. and Kim, S.J., 2016, "Effect of the Number of Turns on the Orientation Dependence of Micro Pulsating Heat Pipes", The 4th International Forum on Heat Transfer (IFHT 2016), Sendai, Japan Yoon, A. and Kim, S.J., 2016, "Heat transfer characteristics of a micro pulsating heat pipe", The 27th International symposium on transport phenomena (ISTP27), Sep. 20-23, Honolulu, Hawaii, USA Joo, Y. and Kim, S. J., 2016, "Design of heat sinks using topology optimization in natural convection", The 27th International symposium on transport phenomena (ISTP27), Sep. 20-23, Honolulu, Howaii, USA Kim, S.J., "Recent advances in micro pulsating heat pipes", The 27th International symposium on transport phenomena (ISTP27), Sep. 20-23, Honolulu, Howaii, USA. (Keynote Lecture) Lee, J.S. and Kim, S.J., 2016, "Experimental investigation on silicon-based pulsating heat pipes with different channel geometry: Study on operating limit", Joint 18th International Heat Pipe Conference and 12th International Heat Pipe Symposium, Jeju, Korea Kim, J. and Kim, S.J., 2016, "Experimental study on the effect of the ratio of adiabatc section length to condenser length on the thermal performance of pulsating heat pipes", Joint 18th International Heat Pipe Conference and 12th International Heat Pipe Symposium, Jeju, Korea Lee, G. and Kim, S.J., 2016, "The Pressure Drop of Radial Plate Fin Heat sinks under L-Shape Flow," The 1st pacific rim thermal engineering conference, Waikoloa, Hawaii, USA Jo, J.Y. and Kim, S.J., 2016, "Heat Transfer by Oscillating Flow in a Two-Parallel Plate Channel with a Sinusoidal Temperatrue Distribution at the External Wall of the Channel," The 1st pacific rim thermal engineering conference, Waikoloa, Hawaii, USA 2015 Yoon, A. and Kim, S.J., 2015, “The effect of transverse conduction on the oscillation flow and the thermal performance of a micro flat plate pulsating heat pipe,” The 26th International symposium on transport phenomena (ISTP-26), Leoben, Austria Joo, Y. and Kim, S.J., 2015, “Thermal optimization of internally finned-tube in natural convection,” First thermal and fluids engineering summer conference, New York, USA Lee, J.S.,Kim, S.J. and Park S.W., 2015, “Effect of cross-section geometry on the thermal performance of a pulsating heat pipe,” First thermal and fluids engineering summer conference, New York, USA Noh, H.Y. and Kim, S.J., 2015, “Operational characteristics of pulsating heat pipe operating in circulation mode,” International technical conference and exhibition on packaging and intergration of electronic and photonic microsystems(InterPACK 2015) & 13th International conference on nanochannels, microchannels, and minichannels(ICNMM 2015), San Francisco, USA Jun, S.H. and Kim, S.J., 2015, “Comparison of the thermal performances and flow characteristics between closed-loop and closed-end pulsating heat pipes,” The 9th International conference on boiling and condensation heat transfer, Boulder, Colorado, USA 2014 Kwon, G.H. and Kim, S.J., 2014, “Analysis of pulsating heat pipe with a dual-diameter tube,” The 10th International conference on heat transfer, fluid mechanics and thermodynamics (HEFAT 2014), Orlando, Florida, USA Yoon, A.J. and Kim, S.J., 2014, “The effect of substrate conduction on the thermal performance of a flat plate pulsating heat pipe,” The 10th International conference on heat transfer, fluid mechanics and thermodynamics (HEFAT 2014), Orlando, Florida, USA Joo, Y. and Kim, S.J., 2014, “Comparison of thermal characteristics between the plate-fin and pin-fin heat sinks in natural convection,” The 10th International conference on heat transfer, fluid mechanics and thermodynamics (HEFAT 2014), Orlando, Florida, USA Lee, J.S. and Kim, S.J., 2014, “Effects of filling ratio and input heat flux on the thermal performance and flow pattern of a pulsating heat pipe,” The 15th International heat transfer conference (IHTC 2014), Kyoto, Japan 2013 Kwon, G.H. and Kim, S.J., 2013, “Study on the flow and heat transfer characteristics of pulating heat pipe with asymmetric configurations,” International technical conference and exhibition on packaging and intergration of electronic and photonic microsystems (InterPACK 2013), San Francisco, USA Trainer, D. and Kim,S.J., 2013, “Heat transfer performance of air-assisted impinging water jet under a fixed pumping power constraints,” International technical conference and exhibition on packaging and integration of electronic and photonic microsystems (InterPACK 2013), San Francisco, USA Jung, J., Kim, S.J. and Kim, J., 2013, “Measurements of pool boiling critical heat flux using IR thermometry,” 8th International topical team workshop on two-phase systems for ground and space applications, Bremen, Germany Jung, J., Kim, S.J. and Kim, J., 2013, “Local heat transfer measurements in pool boiling using infrared thermometry,” 8th World conference on experimental heat transfer and thermodynamics (ExHTF8), Lisbon, Portugal 2012 Trainer, D., and Kim, S.J., 2012, “Heat transfer performance of air-assisted impinging water jet under a fixed pumping power constraints,” The third international forum on heat transfer (IFHT2012), Nagasaki, Japan. Lee, J., Youn, Y.J., and Kim, S.J., “Experimental study on ther thermal performance of a pulsating heat pipe,” The 3rd international forum on heat transfer (IFHT2012), Nov. 13-15, Nagasaki, Japan. Kwon, G.H., and Kim, S.J., “Effect of varying channel diameter on flow patterns and thermal performance of a pulsating heat pipe,” The 3rd international forum on heat transfer (IFHT2012), Nov. 13-15, Nagasaki, Japan. Jung, J., Kim, J., and Kim, S.J., “Measurement of heat transfer parameters in pool boiling using infrared thermometry,” The 3rd international forum on heat transfer (IFHT2012), Nov. 13-15, Nagasaki, Japan. Kim, J., and Kim, S.J., “Transport phenomena in alumina nanopores for power generation from a salinity gradient by reverse electrodialysis,” The 3rd international forum on heat transfer (IFHT2012), Nov. 13-15, Nagasaki, Japan. Trainer Daniel, and Kim, S.J., “New local heat transfer correlation for air-assisted liquid impinging jets,” The 3rd international forum on heat transfer (IFHT2012), Nov. 13-15, Nagasaki, Japan. Kim, S.J., “Recent advances in impinging jets,” The third international forum on heat transfer (IFHT2012), Nov. 13-15, Nagasaki, Japan. (Keynote Lecture) Kim, S.J., and Youn, Y.J., “Heat transfer enhancement using 2-phase flow oscillation,” The 9th international conference on flow dynamics (ICFD2012), Sep. 19-21, Sendai, Japan. (Invited Lecture) J. Lee, Y. J. Youn, and S. J. Kim, “Effects on filling ratio on the thermal performance of a flat-plate pulsating heat pipe,” The 8th KSME-JSME Thermal and fluids engineering conference(TFFC8), Mar. 18-21, Incheon, Korea. Daniel Trainer, and S. J. Kim, “New flow pattern maps for cocurrent downward air-water flow in macro-and micro- channels,” The 8th KSME-JSME Thermal and fluids engineering conference(TFFC8), Mar. 18-21, Incheon, Korea. 2011 G. H. Kwon, T. Y. Kim, and S. J. Kim, “Electrokinetic microscope for imaging three-dimensional surface topography and heterogeneity,” ASME 2011 international mechanical engineering congress & exposition, Nov. 11-17, Denver, USA. B. Chan, and S. J. Kim, “Wicking performance of two-dimensional bi-porous wicks,” ASME 2011 international mechanical engineering congress & exposition, Nov. 11-17, Denver, USA. K. S. Choo, Daniel Trainer, and S. J. Kim, “The Effect of Channel Diameter on Heat Transfer Characteristics of Two-Phase Flow in Microchannels,” The 8th ASME-JSME Thermal Engineering Joint Conference(AJTEC2011), Mar. 13-17, Honolulu, Hawaii. Y. J. Youn, and S.J. Kim, “Development of a Compact Micro Pulsating Heat Pipe,” The 8th ASME-JSME Thermal Engineering Joint Conference(AJTEC2011), Mar. 13-17, Honolulu, Hawaii. 2010 K. S. Choo, and S.J . Kim, “Heat Transfer Augmentation by Two-Phase ImpingingJet,” The International Heat Transfer Conference(IHTC-14), Aug. 8-13, Washington DC, USA. D. K. Kim, J. Jung, and S. J. Kim, “Thermal Optimization of Plate-fin Heat Sinks with Variable Fin Thickness,” The International Heat TransferConference(IHTC-14), Aug. 8-13, Washington DC, USA. H. S. Park, C. Byon, and S. J. Kim, “Thermal Performance Prediction of Natural Convection Heat Sinks using the Averaging Approach,” 5th China-Japan-Korea Student Symposium, Mar. 18-21, 2010, Hangzhou, China. H. S. Park, S. J. Kim, "Thermal performance improvement of a heat sink with piezoelectric vibrating fins." The International Heat TransferConference(IHTC-14), Aug. 8-13, Washington DC, USA. G. H. Kwon, Y. S. Choi, and S. J. Kim, “Output Power Enhancement By Applying Concentration Gradient In Micro- And Nano-Channels,” Proceedings of International Symposia on 3rd Micro & Nano Technology and Micro/nanoscale Energy Conversion & Transport, Mar. 21-24, 2010, Seoul, Korea. 2009 C. Byon, Y. Nam, S. J. Kim, Y. S. Ju, "The Effect of the Surface Treatment on the Flow Drag Characteristics" ,2009, ASME Micro/Nano Heat and Mass Transfer 09, Shanghai, China. G. H. Kwon, Y. S. Choi, S. J. Kim, "Effect of the concentration gradient on the Electrokinetic energy conversion in micro- and nanochannels", The 2nd International Forum on Multidisciplinary Education and Research for Energy Science, 2009, Okinawa, Japan. J. Jung, S. J. Kim, "Entropy Generation Analysis Of Microchannel Heat Sink", International Mechanical Engineering Congress and Exposition, 2009, Lake Buena Vista, Florida, USA. J. W. Kim, S. J. Kim, “Fluid Flow And Heat Transfer Characteristics Of A Centrifugal Heat Sink,” International Mechanical Engineering Congress & Exposition, 2009, Lake Buena Vista, Florida, USA. Y. S. Choi, S. J. Kim, “Streaming Currents in Silica Nanofluidic Channels,” International Symposium on Transport Phenomena, 2009, Victoria, Cananda. T. Y. Kim, D. K. Kim, S. J. Kim, “Scanning Flow-impedance Microscopy: An Imaging Technique Based on Hydrodynamics,” International Symposium on Transport Phenomena, 2009, Victoria, Cananda. K. S. Choo, S. J. Kim, “Air Jet Impingement Heat Transfer at Low Nozzle-to-plate Spacings under a Fixed Pumping Power Condition,” ASME Heat Transfer Conference, 2009, San Francisco, USA. 2008 Y. S. Choi, S. J. Kim, “Electrokinetic energy conversion phenomena and an application,” The first International Forum on Multidisciplinary Education and Research for Energy Science, Dec. 14-17, 2008, Nikko, Japan. C. Byon, S. J. Kim, “Thermal analysis of natural-convection-cooled heat sinks using the volume-averaging approach,” IMECE08, Nov. 2-6, 2008, Boston, USA. Y. J. Youn, K. S. Choo and S. J. Kim, “Heat transfer characteristics of a microscale impinging jet from a confined nozzle,” The Seventh JSME-KSME, Oct. 13-16, Hokkaido, Japan. K. S. Choo, S. J. Kim, “The effect of various wafer thicknesses on hot spot temperature,” Itherm, May 28-31, 2008, Orlando, USA. D. K. Kim, S. J. Kim, “Comparison of thermal performances of plate-fin and pin-fin heat sinks subject to an impinging flow,” Itherm, May 28-31, 2008, Orlando, USA. T. Y. Kim, D. K. Kim and S. J. Kim, “Scroll heat sink: A heat sink with the moving fins inserted between the cooling fins,” Itherm, May 28-31, 2008, Orlando, USA. 2007 K. H. Do and S. J. Kim, “Mathematical Model for a Flat Heat Pipe with a Grooved Wick Structure,” 18th International Symposium on Transport Phenomena. Aug. 27-30. 2007. Daejeon, Korea. D. K Kim, S. J. Kim and A. Majumdar. "Electrokinetic Flow meter." 18th International Symposium on Transport Phenomena. Aug. 27-30. 2007. Daejeon, Korea. 2006 K. H. Do, T. H. Kim and S. J. Kim, "Modified Similarity Solutions for velocity and Temperature Distributions of a Microchannel Heat Sink Subject to an Impinging Jet," 13Th International Heat Transfer Conference, Aug. 13-18, 2006, Sydney, Australia. T. Y. Kim and S. J. Kim, "Experimental Study on the Thermal Performance of Cross-cut HeatSinks," 17th International Symposium on Transport Phenomena, Sep. 6-8, 2006, Toyama, Japan. 2005 Y. S. Choi, S. J. Kim and M. U. Kim, "Molecular Dynamics Study on Unstable Motions and Rupture Phenomena of Liquid Nanojet," The Sixth KSME-JSME Thermal and Fluids Engineering Conference, Mar. 20-23, 2005, Jeju, Korea. D. K. Kim, I. H. Jo and S. J. Kim, "Study on the Averaging Approoach for Microchannel Heat Sinks for Electronics Cooling," The Sixth KSME-JSME Thermal and Fluids Engineering Conference, Mar. 20-23, 2005, Jeju, Korea. I. Y. Han and S. J. Kim, "Technique for Measuring and Controlling Micro Scale Surface Temperature," The Sixth KSME-JSME Thermal and Fluids Engineering Conference, Mar. 20-23, 2005, Jeju, Korea. I. Y. Han and S. J. Kim, "Technique for Measuring and Controlling Micro Scale Surface Temperature," The Sixth KSME-JSME Thermal and Fluids Engineering Conference, Mar. 20-23, 2005, Jeju, Korea. 2004 S. J. Kim, H. H. Oh, “Numerical simulation for thermal characterization of 3-D electronic packages,” I-MAPS Korea, Nov. 12, 2004, Korea. D. K. Kim and S. J. Kim, “Averaging approach for microchannel heat sinks subjected to the uniform wall temperature condition,” 6Th Electronics Packaging Technology Conference, 2004, Singapore. J. Y. Min, S. J. Kim, “Determination of the unknown coefficients in stress and flux conditions at fluid-porous interface.” Inter Society Conference on Thermal Phenomena, 2004, Las Vegas, USA. T. H. Kim, S. J. Kim, “Development of a micro flow sensor.” The First International Symposium on Micro & Nano Technology, March 14~17, 2004, The Waikiki Beach Marrio Resort, Honolulu, Hawaii, USA. S. J. Kim, "Sensing and Modeling Techniques for Micro and Nano Scale Transport," The First International Symposium on Micro & Nano Technology, March 14~17, 2004, The Waikiki Beach Marrio Resort, Honolulu, Hawaii., USA. 2003 D. K. Kim, I. Y. Han, and S. J. Kim, "Study on the Transient Characteristics of the Sensor Tube of a Thermal Mass Flow Meter," Proc. of IMECE03, Nov. 15-21, 2003, Washington, D. C., USA. D. Kim and S. J. Kim, "Thermal Optimization of Microchannel Heat Sink with Pin Fin Structures," Proc. of IMECE03, Nov. 15-21, 2003, Washington, D. C., USA. J. K. Seo, S. J. Kim and K. H. Do, "A General Mathematical Model to Account for the Effect of Liquid-vapor Interficial Shear Stress of a Heat Pipe with a Grooved Wick Structure: Modified Shah Method," International Heat Pipe Symposium, Oct., 2003, Jeju, Korea. K. H. Do, S. J. Kim and G. Hwang, "Modeling and Thermal Optimization of a Micro Heat Pipe with Curved Triangular Grooves," Proc. of InterPack03, July 6-11, 2003, Maui, Hawaii, USA. S. P. Jang and S. J. Kim, "Fluid Flow and Thermal Characteristics for a Microchannel Heat Sink Subject to an Impinging Jet," Proc. of InterPack03, July 6-11, 2003, Maui, Hawaii, USA. 2002 K. I. Shim, J. W. Yoo, and S. J. Kim, "Thermal Analysis of an Internally Finned Tube Using a Porous Medium Approach," The Fifth JSME-KSME Fluids Engineering Conference, Nov. 17-21, 2002, Nagoya, Japan. H. C. Ryu, D. J. Kim, and S. J. Kim, "Experimental Analysis of Shrouded Pin Fin Heat Sinks for Electronic Equipment Cooling," The Eighth Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, June 1-1, 2002, San Diego, CA, USA. 2001 S. P. Jang, S. J. Kim, "Fundamental Analyis of Heat Transfer Phenomena in a Sensor Tube of a Mass Flow Controller," 2001, Proc. of KSME-JSME Symposium, pp. 129-135, Seoul, Korea. J. K. Seo , and S. J. Kim, "Mathematical Model and Thermal Optimization of a Miniature Heat Pipe with a Grooved Wick Structure for Electronic Equipment Cooling," Proc. of the Pacific Rim/ASME International Electronic Packaging Technical Conference and Exhibition, 2001, Hawaii, USA. 2000 J. K. Seo, and S. J. Kim, "Thermal Optimization of a Miniature Heat Pipe with a Grooved Wick Structure Encountered in Electronic Equipment Cooling," Proc. of 4th JSME-KSME Thermal Engineering Conference, 2000, Vol 1, pp. 675-680, Kobe, Japan. J. W. You, J. Y. Min, and S. J. Kim, "Analysis of forced convection in a tube with circular-sectored fins," Proc. of 4th JSME-KSME Thermal Engineering Conference, 2000, Vol 1, pp. 705-710, Kobe, Japan. S. P. Jang, S. J. Kim, and D. H. Chio, "Experimental and Numerical Analysis of Heat Transfer Phenomena in a Sensor Tube of a Mass Flow Controller," Proc. of 4th JSME-KSME Thermal Engineering Conference, 2000, Vol. 3 , pp. 651-656, Kobe, Japan. D. Kim, S. J. Kim, and J. M. Hyun, "On the Thermal Boundary Conditions at the Interface between a Porous Medium and an Impermeable Wall," Proc. of 4th JSME-KSME Thermal Engineering Conference, 2000, pp. 197-202, Kobe, Japan. 1999 S. J. Kim, and D. Kim, "Compact modeling of fluid flow and heat transfer in heat sinks," Proc. of Advances in Electronic Packaging-1999, 1999, pp. 719-726, Hawai, USA. S. J. Kim, and D. Kim, "Fluid flow and heat transfer in microstructures for electronic equipment cooling," Proc. of 4th KSME-JSME Fluids Engineering Conference, 1998, pp. 325-328, Pusan, Korea.
Copyright(C) Applied Heat Transfer Lab. Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology Room# 3104, 335 Gwahangno (373-1 Guseong-dong), Yuseong-Gu, Daejeon, 305-701, Republic of Korea. Tel.+82-42-350-3083 Fax.+82-42-350-3210 2007 Applied Heat Transfer Lab. All Right Reserved. Webmaster